FoldaRap, Peer-to-Peer Edition

Financié le 09 / 07 / 2013
Success story!
Accumulé
€ 52.835
Minimal
€ 12.000
Optimal
€ 16.000
97 Cofinanceurs
Channel
  • Pour € 10

    Supporter

    Toutes les contributions sont bienvenues et seront récompensées par un grand merci ! Une jolie carte postale et quelques autocollants :)

    > 07 Cofinanceurs
  • Pour € 20

    Curieux

    Une pièce imprimée aléatoirement choisie par celles des essais qui nous ont permis de développer la FoldaRap.

    • les récompenses antérieures
    > 06 Cofinanceurs
  • Pour € 40

    Explorateur

    Un petit objet imprimé :)

    • les récompenses antérieures
    > 00 Cofinanceurs
  • Pour € 60

    Collectionneur

    Un T-shirt portant une illustration de la FoldaRap spécialement conçue pour cette édition P2P.

    • les récompenses antérieures
    > 02 Cofinanceurs
  • Pour € 500

    FoldaRap Edition P2P

    La récompense la plus intéressante de cette campagne et probablement la façon la plus rapide d'avoir votre kit !

    Vous recevrez tout ce dont vous avez besoin pour construire la dernière version de la FoldaRap, sauf les pièces imprimées.
    Trouvez une personne avec une RepRap près de chez vous pour les ajouter au kit !

    (indice : avec probablement plus de 40 000 machines dans la nature, il doit sûrement y en avoir une près de chez vous. Nous pouvons aussi vous les imprimer séparément)

    > 14 Cofinanceurs
  • Pour € 600

    FoldaRap kit complet

    Tout ce dont vous avez besoin pour construire la dernière version de la FoldaRap !

    > 65 Cofinanceurs
  • Pour € 900

    Atelier @NYBICC

    Atelier au NYBICC (Nancy, France)

    On trouve une date qui arrange tout le monde et vous venez monter votre FoldaRap avec nous dans notre Makerspace super convivial, le Nancy Bidouille Construction Club !

    > 05 Cofinanceurs
  • Pour € 1.000

    Atelier autour du monde

    Nous trouvons une date qui arrange tout le monde et je viens (entre un week-end et une semaine) pour vous aider à construire et à apprendre à utiliser la ou les FoldaRap(s) que vous avez financées !

    > 02 Cofinanceurs

A simple part at the heart of everything.

18 | 09 | 2013

Often everything boils down to a simple thing, upon which a whole assembly rely and needs to work. It's easy to think of our hearth, brain, and organs... in the case of a RepRap I don't know what this one would be, but the hotend is one of the most critical part of our machines.

The real big news is : we finally got our prototypes of the missing part to make the hotends !!!
The small (~20mm) stainless barrel that makes the thermal brake and allow this hotend to be so compact and efficient.

I got the prototypes last Sunday almost warm from our local CNC shop. Ten were made from the available shared blueprint and need a small piece of ptfe as a liner, and three are the same as on the beta Huxley : straight and without plastic -> can be used at much higher temp to extrude nylon, polycarbonate, and other fancy thermoplastics.
I don't know why they abandoned this version. Mine still works and has been ported over time and over several of my machines. Through this one kilometers of filament have passed, giving birth to hundreds of things and almost all of the 30 first Foldaraps.

The same Sunday I finished to assemble an hotend with a straight barrel and could push some filament by hand. On Monday night I made a short print to see how it goes in real conditions. It was nice at first but at a third of the cube the output wasn't constant, then I realized that I forgot to tension the springs at all... after having added a little pressure to correct that during the print, the rest of the cube came perfectly.

It need a little more tries before validating it and ordering them by full batches, but as an hint of my level of optimism (foolishness?) : I'm actually showing the machine with our new head tomorrow in front of 700 people from the Chambers of Commerce and Industry during the afternoon in a panel titled "Other realities, new industrial education" ;-)

The whole event will be live broadcast at http://www.cci.fr/web/2013-universite-des-cci/accueil

If everything works as intended, the first difficulties ("argh the new one-piece-hotend don't work for us") will have turned out in the advantage of having been forced to find someone who can machine this part locally, making us a little more independent.
And we will be able to start what we are all waiting for, workshops and shipping !

Commentaires

Mathias B
Hace 1 décennie
Amazing news, as the wise man said : "what does not kill you makes your foldable 3D printer stronger"

Good luck for tomorrow =) !
Louis Martin
Hace 1 décennie
voilà des bonnes nouvelles ,pour le CCI relâche ils ne sont que 700 ,bon courage

kourou

Inicia sesión para dejar un comentario